Hover over image to zoom
4ms SCM + Breakout, Combo, USED

4ms SCM + Breakout, Combo, USED

By: 4ms


Available Immediately

Product Description

This item bundle is used, has been fully tested and is guaranteed to be working.

Clocking Module/Frequency Multiplier

The SCM measures the time between the previous two pulses, and uses that value to calculate the frequency of the clock signals on the output jacks. Applying a steady clock will produce an output clock of equal frequency on the x1 jack, and a clock of double the frequency on the x2 jack... and a clock of eight times the frequency on the x8 jack. The other five jacks produce a clocks that are also multiples of the input clock, but these jacks will "rag" the beat (Slip and Shuffle), as well as drop some beats out (Skip): S3, S4, S5, S6, S8.

SCM v1.2 Features
• Multiply-by-1 to Multiply-by-32, on 8 output jacks
• Five Slipped/Shuffled/Skipped clock outputs (S3, S4, S5, S6, S8). Each is based on a multiple of the input clock frequency (x3, x4, x5, x6, and x8, respectively)
• Three steady clock outputs (x1, x2, and x8), which are not effected by • Slip/Shuffle/Skip effects
• CV Rotate jack to shift multiply-by amount on all jacks
• CV Slip causes particular beats to land ahead in time
• UART header-Connects to optional MIDI breakout panel-Arduino-compatible
• ISP header: Connects to in-circuit programmer such as AVR ISP MKII for reprogramming code
• Maximum input frequency 3kHz

SCM Breakout v2 (Built from Kit) Features
• CV Shuffle jack and knob selects which beats are slipped by CV Slip (default=every other beat)
• CV Pulse Width jack and knob controls width of output pulses (default=50%)
• CV Skip jack and knob omits certain beats in a pattern (default=no skip)
• Re-sync Trigger input
• Additional CV Rotate and CV Slip jacks add to main SCM's Rotate and Slip jacks
•Fast /Faster CV Gate jacks and switches speeds up multiply-by amounts

• Clock In
• Rotate
• Slip

Controls with CV Inputs (SCM BO)
• Resync
• Rotate
• Slip
• Shuffle
• Skip
• PW
• Faster
• Fast

• 8 Multiplications of the incoming clock signal

Physical Specifications: SCM
• Format: Eurorack
• Width: 8HP
• Depth: 1.5”

Physical Specifications: SCM Breakout
• Format: Eurorack
• Width: 4HP
• Depth: 1.5”

Physical Specifications (SCM BO)
• Format: Eurorack
• Width: 8HP
• Depth: 1.5”

Electrical Specifications
• Power: +/-12V @ 60mA

Physical Condition
• Good

Functional Condition
• 100% Working

• The modules themselves
• Eurorack power cable