Hover over image to zoom
Bastl Instruments Little Nerd - Wood

Bastl Instruments Little Nerd - Wood

By: Bastl Instruments

CV2084

$155.00
Available Immediately

Product Description

Clock, Trigger and Gate Processor

littleNerd is trigger and clock manipulation module which tries to be able to do everything you have ever imagined and wished to do with trigger or clock signals in your modular in only 6 HP. It has 2 inputs and 5 programmable outputs (A,B,C,D,E). Signal from input 1 can be processed into outputs on channels A,B and C . Signal input 2 can be processed into outputs D and E. Signal input 2 has a probability mix knob which sets whether the signal to process by output D and E is taken from input 1 or input 2 (fully counter clockwise means it always processes signal from input 2).

Every channel has a dedicated knob and the functionality of the knob is dependent on the output mode of the individual channel. Output mode can be set by pressing the MODE button after selecting the channel & by turning one of the A,B,C,D,E knobs (now the RGB shows color of the specific mode). The color of the RGB led indicates which mode is selected for the specific channel.

In most of the modes you have 2 PARAMETERS you can set. The PARAMETER 2 is set only while holding down the SHIFT button. The PARAMETER 1 is set while no buttons are pressed. The modes are: DELAYED DIVIDER, TRIGGER 2 GATE / FLOP DIVIDER, MULTIPLIER, TRIGGER REPEATER, EUCLIDIAN SEQUENCER, CLOCK OSCILLATOR and PROBABILITY / GROOVE.

Physical Specifications
• Format: Eurorack
• Width: 6hp
• Depth: 50mm

Electrical Specifications
• Power: +5V @ 30mA - Requires 5 volts in bus board

In the Box
• The module itself
• Eurorack Power Cable