Hover over image to zoom
Kenton Modular-Solo

Kenton Modular-Solo

By: Kenton

CV0579

$299.00
Out of stock

Product Description

High specification Eurorack Modular MIDI to CV converter

The MODULAR SOLO is designed for use in Eurorack modular systems. It is much more than just a MIDI to CV converter as it incorporates a built in LFO as well as portamento and many other functions. Please take some time to read through this manual prior to first use to avoid any operational difficulties.

Specifications
• Designed to control all types of mono-synth
• Super-fast response time
• Famous Kenton build quality
• High specification 16 bit D/A converter for main CV for rock-steady pitches
• CV/Gate/Aux/Clock outputs on 3.5mm mono jack sockets (3.5mm to 1/4" cables are available in our cables section)
• CV & Gate signals can be sent via the ribbon cable to the system bus - selected using jumpers
• MIDI IN socket (5 pin DIN)
• MIDI OUT/THRU (5 pin DIN) socket can be switched to become DIN Sync 24 instead
• Any MIDI channel can be selected
• Switchable for V/oct & Hz/V & 1.2V/oct scaling systems
• Fine tune & scale are software controllable
• Transpose (coarse tune) - up & down 12 semitones
• Adjustable pitchbend range - up to 12 semitones
• Programmable Gate V-trig (up to 10V) or S-trig (with or without pull-up)
• Multiple and single trigger modes
• Note priority selection - newest / lowest / highest
• Old notes are remembered to facilitate trill effects and increase playability
• Portamento - fixed rate or fixed time modes
• Auto Portamento mode selectable (where legato playing turns on Portamento)
• Portamento Controller is selectable (default 65)
• Programmable AUX 1,2,3,4 variable analogue output controllable by any MIDI controller
• 2x fully independent clock outputs 5V or 10V selectable
• Programmable LFO - 9 wave shapes including random
• LFO can modulate pitch &/or AUX output
• Separate Controllers for LFO to CV and LFO to AUX
• LFO can be synchronised to MIDI clock
• LFO sync point can be selected
• Key-on can reset LFO
• Clock outputs can independently select from 1 to 12, 24, or 48 clocks per quarter note
• Set-up are stored in non-volatile memory for easy recall
• MIDI monitor mode - for easy MIDI troubleshooting
• MIDI OUT/THRU socket can be switched to become DIN Sync 24
• Portamento - new fixed time mode as well as existing fixed rate
• Auto Portamento mode selectable (where legato playing turns on Portamento)
• LFO sync point can be selected
• LFO to CV controller now has Min, Max and Reset values
• LFO to Aux controller now has Min, Max and Reset values
• Key-on can reset LFO
• All parameters are controllable in real-time by SysEx
• Din sync and clock can be used at the same time as CV and Gate outputs

Inputs
• MIDI

Outputs
• CV (1 volt per octave or Hz per volt)
• Gate
• Aux 1, 2, 3, 4
• Clock 1, 2
• MIDI/Sync24

Controls
• Select
• Increment
• Decrement

Physical Specifications
• Format: Eurorack
• Width: 10HP
• Depth: 80mm

Electrical Specifications
• Power: +12v @ 85mA, -12v @ 3mA

Included
• The module itself
• Eurorack Power Cable

Download Manual

Other items you may be interested in: