Hover over image to zoom
Kenton Pro-Solo mkII
Kenton Pro-Solo mkIIKenton Pro-Solo mkIIKenton Pro-Solo mkII

Kenton Pro-Solo mkII

By: Kenton


Available Immediately

Product Description

Single channel MIDI to CV converter

However, the PRO SOLO mkII is much more than just a MIDI to CV converter, incorporating a built in LFO as well as portamento functions.

• Designed to control all types of mono-synth
• Super-fast response time
• Famous Kenton build quality
• Rugged brushed aluminium case
• CV and Aux1 outputs use high specification 16 bit D/A converters for rock-steady pitches
• Gate / S-trig output configurable output to match virtually any synth
• Aux2 & Aux3 outputs are on-off only (zero or 5V)
• Dedicated DIN socket output for Sync24
• CV/Gate/Aux1,2,3 outputs on 3.5mm jack sockets (3.5mm to 1/4" cables are available in our cables section)
• Any MIDI channel can be selected
• Switchable for V/oct & Hz/V & 1.2V/oct scaling systems
• Fine tune & scale are software controllable
• Transpose (coarse tune) - up & down 12 semitones
• Adjustable pitchbend range
• Programmable Gate V-trig (up to 15v) or S-trig (with or without pull-up)
• Multiple and single trigger modes - adjustable re-trigger time
• Note priority selection - newest / lowest / highest
• Old notes are remembered to facilitate trill effects and increase playability
• Portamento - fixed rate or fixed time modes
• Auto Portamento mode selectable (where legato playing turns on Portamento)
• Portamento Controller is selectable
• Programmable Auxilary outputs controllable by any MIDI controller
• Programmable LFO - 9 wave shapes inc. random
• LFO can modulate pitch &/or AUX output
• Separate Controllers for LFO to CV and LFO to AUX
• LFO can be synchronised to MIDI clock
• LFO sync point can be selected
• Key-on can reset LFO
• Aux3 output can output clock - Aux2 can output stop-start
• Clock output can select from 1 to 12, 24, or 48 clocks per quarter note
• All parameters are controllable in real-time by SysEx
• Set-ups are stored in non-volatile memory for easy recall
• 40 memory locations for store / load
• MIDI monitor mode - for easy MIDI troubleshooting
• USB powered
• Size 130mm x 97mm x 40mm
• Suitable for use with XP / Vista / MAC OS-X v10.2 onwards / Linux

Physical Specifications
• 130 x 97 x 40 mm
• 450g

• MIDI: In, Thru (selectable)
• Analogue Outputs: CV on 3.5mm jack (V/oct or Hz/V) Gate on 3.5mm jack (Gate or S-trig) Aux on 3.5 mm jack Digital Outputs: Pins 1 & 3 of Thru socket (if selected) off=0 volts on=5 volts
• Power: 9V DC (regulated or unregulated) – never apply more than 12V(never use an unregulated supply greater than 9V as unregulated supplies typically give a higher output than shown). We will include the correct power supply according to the delivery address for products bought directly from Kenton.

Other items you may be interested in: