Hover over image to zoom
Korg littleBits Control Voltage (CV)

Korg littleBits Control Voltage (CV)

By: Korg


Available Immediately

Product Description

Integrate your Synth Kit with other analog synthesizers like modular synths or analog keyboards!

• Control littleBits behaviors like the pitch of oscillators, the cutoff frequency of filters and more from your analog synth gear
• Control analog synthesizers with littleBits, like a bend sensor, light sensor or any other input from the littleBits library to create new control interfaces for your synth
• CSync your littleBits to other gear like Korg’s Volca series

The CV module can scale incoming voltages as high as 12V down to the 5V system the littleBits system employs. To use the CV module to control your other littleBits modules, connect the control device to the “CV In” jack. CV signals that come in through the "CV In" jack are routed to the output bitSnap™. The "CV In" jack is a switching jack so that any CVs coming in through the input bitSnap™ are not routed to the bitSnap output. When using the CV module as an input, you can control the pitch of oscillator modules, the cutoff of filter modules, trigger the envelope module, or control the speed of the micro sequencer module (put the micro sequencer into “Step” mode for this).

CV Out
To use the CV module to control your other CV enabled synthesizer equipment, connect the control device to the “CV Out” jack. CV signals received from littleBits modules at the input bitSnap™ are routed to the "CV Out" jack and the output bitSnap™.

• 1x CV bit