Hover over image to zoom
Moog Werkstatt-01 Kit
Moog Werkstatt-01 KitMoog Werkstatt-01 KitMoog Werkstatt-01 Kit

Moog Werkstatt-01 Kit

By: Moog

CV1295

$199.00
Available Immediately

Product Description

Patchable, Hackable, Compact, Semi-modular Synth Kit (no-soldering req'd)

The Werkstatt-01 Kit is a patchable and compact one oscillator analog synthesizer. It was originally created as a kit, to be the foundation for exclusive “Engineering VIP” workshops at Moogfest 2014. Due to a number of requests, Moog is offering a no-soldering-required version of the Werkstatt-01 Kit in limited quantities, at select US dealers. Assembly is extremely simple: any user can quickly build an analog synthesizer based on classic Moog circuits, and if desired, modify it. Werkstatt was created to be an educational tool, but it is also a very powerful, compact analog synthesizer from Moog.

Werkstatt is 100% US made

OSCILLATOR
• Single VCO w/ frequency control (8Hz to 16KHz)
• Saw and square waveshapes w/ control for square pulse width
• Envelope or LFO selectable Mod Source that can be assigned to PWM or Pitch w/ Amount control
• Ability to PWM the square wave

FILTER
• Classic 4-Pole Moog Ladder Filter w/ Resonance control (20Hz-20KHz)
• Select between the Envelope generator and LFO as Mod Source.
• Polarity switch (+/-) and amount knob for control of filter cutoff modulation

LFO
• Selectable Square or Triangle waveshape w/ rate control (2Hz-600Hz)

VCA/AMP
• Select between the Envelope Generator or ON (Drone)

ENVELOPE
• Controls for Attack & Decay time w/ Sustain On/Off switch

KEYBOARD
• One octave low-note priority legato keyboard w/ glide control

PATCHBAY
• VCA Input 0V to +5V in VCA EG Mode, +/-2.5V in VCA ON Mode • VCF Input -5V to +5 • VCO LINEAR FM Input +/-2.5V - NOTE: this is an inverting control input • VCO EXPONENTIAL FM Input -5V to +5V, 1V/Octave trimmable • LFO CV Input 5V to +5V – NOTE: Negative CV slows LFO more than the panel
• VCF AUDIO Input Unbuffered/Unmixed AC coupled input to VCF
• 2x KB CV Output 3V/semitone from 1 keyboard - NOTE: Attenuate for 1V/Octave
• 2x TRIG Output 5 msec pulse, 0 to +5 V signal
generated from low-note priority • 2x GATE Output 0 to +5V signal generated from low-note priority
• 2x EG Output 0 to +5V signal, Simple ASD or AD type Envelope Generator
• 2x LFO Output -2.5 to +2.5V Triangle or Square wave, selected via LFO Switch
• 2x VCF Output -2V to +2 V signal for audio or CV uses
• 2x VCO Output 0V to +5V VCO signal, wave selected by VCO Wave Switch

REAR PANEL
• AUDIO Output Nominal +/-1.5V Signal
• POWER +12VDC Center Positive w/ 1.2A Wall transformer
• POWER CONSUMPTION 1.8 Watt AVG

Other items you may be interested in: