Hover over image to zoom
Steady State Fate Entity Percussion Synthesizer

Steady State Fate Entity Percussion Synthesizer

By: Steady State Fate

CV2882

$339.00
Available Immediately

Product Description

Percussion Synthesizer

The Entity Percussion Synthesizer is a complete and versatile voice module, geared for designing a huge array of percussion, bass and lead sounds and well suited for processing external audio sources.

The design consists of a high fidelity resonant band pass filter, two voltage controlled decay envelopes, multi-mode noise generator, a high fidelity VCA and a voltage controlled diode wave multiplier. Every parameter on the Entity Percussion is voltage controllable.

Two voltage controllable decay envelopes are provided to modulate the frequency and/or volume of the resonator and noise. DECAY controls the FM/VCA decay time of the resonator, N-DECAY controls the VCA decay time of the noise generator.

Features
• BODY control simulates the tightness of a drum head. From soft and muted to flabby and bass heavy.
• PITCH affects the frequency of the resonant filter. The nominal control range is from about 8Hz to 2.2kHz. This range is expanded upon use of internal and external control voltage sources.
• HARMONICS increases the number of overtones heard via the main resonant sound source. Subtle to extreme
• RING controls the resonant decay time, independently from the modulation controls. Both short and plucky and very long rings are obtainable.
• OUTPUT section controls the resonator volume level and the overall output level when NOISE-FILTER mode in enabled. MIX switch selects processing the internal resonator, external source via the EXT IN jack or a mix of both, greatly enhancing the sound capabilities of the Entity PS.
• NOISE generator inspired by the Quantum Rainbow 2, with three select-able noise modes - WHITE, PINK and FILTER. FILTER mode routes the noise into the resonator's signal path - to be processed through the resonant filter, harmonics processor and main VCA.
• N-LEVEL independently controls the volume and CV level of the noise VCA.
• DELAY provides voltage controlled delay of the resonator DECAY envelope with respect to the noise (N-DECAY) envelope
• FM LVL is a bipolar attenuator for controlling the frequency modulation depth of the resonator. The switch below selects the internal resonator decay envelope, a mix of the decay envelope and external FM CV source, or the external FM CV source only.
• DUCK output jack provides an offset and inverted copy of the resonator DECAY envelope for ducking VCAs and other modulation duties.

Physical Specifications
• Format: Eurorack
• Width: 14hp
• Depth: 23mm

Electrical Specifications
• Power: +12V @ mA, -12V @ mA , +5V @ 0mA

In the Box
• The module itself
• Eurorack Power Cable